Swiftfix Distributors Ltd
Unit 8 Mill View Barn, Grange Road, Netley, Southampton, Hampshire , United Kingdom, SO31 8GD
We stock a large range of high quality construction & marine fixings. As well as the standard range we specialise in larger sizes, longer lengths and larger diameters of screws and fasteners.
Quality TCT blades featuring a Triple Chip Ground (TCG) tooth configuration for fast and clean cuts in various metal sections
TOOTH TYPE KEY:
ATB Tooth: Suitable for most applications including rip saws and table saws.
ATB Neg Tooth: Suitable for use on mitre saws and chop saws. Minimises snatching and pick up of material.
ATB 30 Degree Tooth: Suitable for laminate material to reduce damage to the surface. Fast cut.
TCG Tooth: Suitable for materials such as aluminium, plastic, wood laminates and other manmade materials. Leaves a chip-free finish due to its bevelled corner tooth which cuts first followed by a flat top tooth.
CIRCULAR SAW BLADE CUT TYPE:
WOOD - COARSE FINISH
These blades have between 16 and 20 teeth for smaller lades and 28 teeth for blades with a diameter greater than 190mm. Suitable for ripping through woods such as softwood, hardwood and plywood.
WOOD - MEDIUM FINISH
These blades have between 20 and 28 teeth for smaller blades and 40 teeth for blades with a diameter greater than 190mm. Suitable for cutting through woods such as softwood, hardwood and plywood.
WOOD - FINE FINISH
These blades have between 40 and 80 teeth; 40 teeth for blades with a diameter of up to 190mm, 60 teeth for 210-260mm diameter and 80 teeth for blades with a larger diameter. Suitable for cutting through woods such as softwood, hardwood, particle board, MDF, single-sided wood laminates, hardboard and plywood.
WOOD - EXTRA FINE FINISH
Theses blades have between 60 and 100 teeth; 60 teeth for blades with a diameter of up to 190mm, 80 teeth for 210-260mm diameter and 100 teeth for blades with a larger diameter. Use for an extra fine finish cut through woods such as softwood, hardwood, particle wood, MDF, wood laminates, hardboard and plywood.
ALU/PLASTIC/LAMINATES - FINE FINISH
These blades have Triple Chip Tooth configurations and have between 40 and 100 teeth. Suitable for cutting non-ferrous metals including aluminium, plastic and wood laminates.
BLADE CUTTING SPEED
Thin Sections Up to
2-4mm (20-25 m/sec)
5-12mm (20-30 m/sec)
|136mm||2800-6300 rpm||2800-4900 rpm||2800-4200 rpm|
|165mm||2400-5300 rpm||2400-4200 rpm||2400-3600 rpm|
|180mm||2100-4800 rpm||2100-3700 rpm||2100-3200 rpm|
|185mm||2100-4800 rpm||2100-3700 rpm||2100-3200 rpm|
|230mm||1800-4100 rpm||1800-3200 rpm||1800-2700 rpm|
|255mm||1500-3600 rpm||1500-3100 rpm||1500-2100 rpm|
|305mm||1250-2800 rpm||1250-2200 rpm||1250-1900 rpm|
|355mm||1100-2400 rpm||1100-1900 rpm||1100-1600 rpm|